AUTONET TV

A Hot Mess (AC System-Compresser)

Air conditioning used to be a real luxury in a vehicle, but now it's standard in most.  Your vehicle's air conditioning system is built to last a pretty long time, but like anything mechanical, sometimes it fails. 

It helps to know a little about how the A/C works. There's a compressor that pressurizes the refrigerant (you probably recognize the term Freon).  That makes it hotter, so it then goes through a condenser that cools it off.  Then another component takes out impurities and humidity before the Freon goes to a device that makes it lose pressure before it goes to the evaporator.  That's where it gets colder and takes the humidity out of the air. Then your vehicle's ventilation system blows air over the evaporator, cooling the cabin air that gives you such relief on a hot day.

Of all these parts, one that does a lot of work is the compressor.  It has to compress that refrigerant and circulate it through the system.  It turns on and off several times when it's working. The good news is that if it's going to fail, it sometimes lets you know. 

One of the signs that your air conditioning compressor is going bad is a noise under the hood when the engine is on, sometimes a squealing or grinding sound. It usually is pretty noticeable. Compressors have a bearing that can seize up after time, causing the belt that drives it to squeal when it's trying to turn something that won't turn.  It will sometimes cause that belt to break. 

Your service advisor can tell you if your compressor is repairable or must be replaced.  In the case of a broken belt (often a serpentine belt that drives several components) the belt will have to be replaced as well.

The compressor also has a clutch that turns the compressor on and off so it doesn't have to run all the time. Sometimes that clutch can fail, too, and your service advisor will often recommend you replace the compressor and the clutch at the same time. Our technicians can help make sure your air conditioning system keeps its cool, and you along with it. 

Bauer Auto Service
14455 State Hwy 23
Cold Spring, MN 56320
320-685-8846

Oh, Stop! (Disc Brake Service)

Every time you drive your vehicle, you wear down your brakes just a little bit.  And after a while, that adds up.  Gradually, your stopping power isn't like it used to be.  Since brakes are one of your vehicle's most important safety features, it just makes sense to keep them performing well.

Most vehicles have disc brakes.  One key component, as the name suggests, is the disc.  Most vehicles have discs on their front and rear wheels.  The discs (also called rotors) are made of metal, and each rotates with the wheel hub.  Your brakes also have pads that make contact with the rotors when you press down on the brake pedal, and the friction stops your vehicle.

After many, many stops, that friction wears down both the pads and the discs and reduces their ability to stop the way you need them to.  The discs may also become uneven from all the heat they generate, and your brakes won't stop as well as they used to when they were newer. 

Some signs that your rotors need attention include vibration at the wheels when you stop, discolored rotors (the metal looks blue), excessively hot rotors, or grooves in the metal.  If you see any of these signs, it's time to bring in your vehicle for us to inspect your brakes. 

A technician will measure the thickness and trueness of the rotors and check the surfaces for wear.  If they need to be replaced, they'll be done in pairs, so if a front rotor is bad, the other front rotor will also be replaced. Usually, your brake pads will be replaced at the same time.  You can ask your service advisor if higher-performance brakes would benefit you.

When your vehicle is at the shop, the technician will check other components of your brake system to make sure they are operating safely. Brakes are vital to the safe operation of your vehicle.  Keep them well maintained so they can be there when you need them.

Bauer Auto Service
14455 State Hwy 23
Cold Spring, MN 56320
320-685-8846

Steering You Right (Tie Rod End Replacement)

For drivers, S stands for safety.  And there are three other words that start with S that are all equally important: starting, stopping and steering. For your vehicle to be at its safest, all three functions must be in top shape. 

Steering is one of those things we take for granted.  After all, you turn the wheel and your vehicle changes direction. But sometimes you might notice your steering is a little off.  Maybe you've noticed you turn your wheel slightly and your vehicle doesn't turn. You may feel a little vibration in the wheel that increases when you go faster.  You may hear a little squeak from the wheels when you steer and you may notice your tires aren't wearing evenly.

These are signs that your tie rod ends may be failing. Tie rod ends help connect your vehicle's steering mechanism to the wheels.  They can wear out after you've hit one too many potholes or just from constant use.  They can cause sloppy steering and loose handling, and they should be replaced when they've reached the end of their life span.

If you notice any of these things happening on your vehicle, bring it in to us so a technician can check it out.  There are a couple of different types of steering, recirculating ball steering and the one most of the latest vehicles have, rack and pinion. When we replace your tie rod ends, we will remove and replace the old ones and adjust them to meet your vehicle manufacturer's specifications.

Tie rod ends should often be replaced in pairs, and your vehicle should be aligned afterwards.  Keep your steering working the way it's supposed to, and your vehicle will be sure to steer you right.

Bauer Auto Service
14455 State Hwy 23
Cold Spring, MN 56320
320-685-8846

Steering You Right (Power Steering Signs of Problems)

Nearly every modern vehicle on the road today has power steering, a wonderful invention that makes steering take far less effort than it did in the "good old days."  Today, we take our steering for granted: until something goes wrong, that is.

Most power steering these days is rack-and-pinion, the rack being a metal bar between the front wheels with notches in it and the pinion being a gear whose teeth fits into those notches.  Adding power assist makes it easy to turn. That assist comes in the form of hydraulic fluid that is pressurized by a pump powered by the engine, an electric motor that adds a power assist or a system that uses both an electric motor and hydraulic fluid.

Your vehicle usually gives you a heads up that something is going wrong with its steering. Here are a few signs to look for:

• A humming, whirring, rubbing or grinding sound coming from you engine compartment when you turn.
• Signs of hydraulic fluid leaking, such as wet spots under your vehicle.
• The smell of burning oil while you're driving.
• Steering wheel hard to turn or vibrating.

If you notice any of these signs, it's a good idea to have a trained technician check them out.  They may be signs of:

• Power steering pump going bad
• Steering rack or gear seals wearing out, causing them to lose hydraulic fluid
• Broken fluid hose
• Defective power steering cooler
• Loss of pressure in the power steering gearbox
• Worn out steering pump belt
• Failing electric power steering motor

It's important to have these checked out sooner rather than later. You need to be able to steer properly in order to drive safely. Plus, some of these problems can cause more serious—and expensive—damage if they're not fixed.  Power steering is a wonderful feature of your vehicle.  Keep it well maintained and it will steer you right.

Bauer Auto Service
14455 State Hwy 23
Cold Spring, MN 56320
320-685-8846

Go With the Flow (MAF Sensor Replacement)

A driver brought her vehicle into the shop the other day and told us how she was getting lousy fuel economy and that the engine was running rough.  Plus, the Check Engine light was on.  Our technician checked the code the engine had generated (why the Check Engine light was on) and found the problem.  It was a faulty Mass Air Flow sensor, MAF sensor for short.

This MAF sensor is an important part of your vehicle.  What it does is calculate the amount of air going into your engine.  As you may know, air is taken into your engine where it's mixed with fuel.  Then, the spark plugs fire, that explosive fuel/air mixture detonates, and all these sequential explosions together provide the power to get your vehicle moving down the road. 

It makes sense that if the MAF sensor isn't sending the engine's computers the correct information on the amount of air going in the engine, the fuel/air mixture isn't going to be right. It will either too rich (too much gasoline for the amount of air) or too lean (not enough gasoline for the amount of air).

In this driver's case, the MAF sensor was damaged and needed to be replaced.  Another thing that may cause the MAF to give an incorrect reading is if its wires are dirty or faulty.  So, replacing or cleaning the wires important as well.

Other symptoms that your MAF sensor is bad? If your engine hesitates when you step on the gas, it stalls, or your vehicle is jerky when you accelerate. 

A malfunctioning MAF sensor is not just bad for performance.  Driving with your vehicle in that condition can cause more damage to your engine.  When you bring your vehicle in for us to check, a technician will thoroughly examine your engine to make sure all issues are taken care of.

Bauer Auto Service
14455 State Hwy 23
Cold Spring, MN 56320
320-685-8846