Best Auto Repair, Cold Spring

CONTACT US
Bauer Auto Service
Google My Business WhiteFacebook

320-685-8846

Call us, we're here to help!
Bauer Auto Service Reviews

Archive for December 2020

Passing the Test (How to Prevent Emissions Test Failure)

Posted December 27, 2020 9:13 AM

Vehicle emission testing has become ubiquitous in North America and for a good reason.  Clean air quality is important for the environment and all of us.  Since vehicle emissions are among the main causes of air pollution, emission testing can alert you to problems in your vehicle than can be fixed so it won't needlessly pollute.

Emissions tests are looking for certain toxic gases internal combustion engines produce, such as nitrogen oxide, particulate matter, non-methane organic gases and formaldehyde.  Emissions control systems reduce these gases if they are working properly. 

The best way to minimize pollution is to keep those vehicle systems working properly, and periodic inspection and maintenance is the key.  So if you want to make sure your vehicle will pass an emissions test, it helps to know what might go wrong.

Let's start on the easy one.  Your gas cap could be loose, allowing vapors to escape into the atmosphere.  The most common solution is to replace it.  Or your air filter may be dirty.  A dirty air filter may push your hydrocarbons pass the acceptable level.

Now to the more complicated things.  The mixture of fuel and air in your engine may be tilted toward the "too much fuel" side.  That could cause problems for your vehicle's catalytic converter, a device that converts toxic gases from your exhaust into less toxic pollutants.

Your vehicle has a closed system that prevents fuel tank vapors from escaping into the air; it's called the EVAP system.  A technician can track down problems.

Vehicle engineers have gone to great lengths to minimize the amount of pollution your vehicle produces.  Your vehicle's manufacturer recommends how frequently those systems need servicing.  Keep those systems in good shape and you're likely to pass emissions tests with flying colors.  Neglect them and you might find your vehicle failing an emissions test.  When that happens, you'll have to get the problems repaired before you can get back on the road.

Bauer Auto Service
14455 State Hwy 23
Cold Spring, MN 56320
320-685-8846



Don't Neglect Your Spare (Spare Tire Care)

Posted December 20, 2020 12:24 PM

If you've ever had a flat tire, then you know welcome it is to have a spare tire that is properly inflated, in good shape and easy to get to.  Problem is many of us don't even give our spare tire (if we even have one) a second thought.

If you have an SUV or truck with a spare, it may be mounted outside the vehicle, such as on the tailgate or underneath the vehicle.  All of them, especially those underneath, take the brunt of debris, moisture, salt and dirt from the road surface, a potpourri of corrosion potential.  The hardware that holds these on can rust into a solid mess, making it hard for you or even a roadside assistance service to get off. 

If you have one of those, have it checked and maintained at your vehicle repair facility on a regular basis.  They should be lubricated and cleaned periodically, and some recommend doing this service every time you have your tires rotated.  If the spare is the same size as the tires on the vehicle, it may be a good idea to have it rotated with the others. 

Some vehicles have compact spares that are in a small well in the trunk or some other spot. Most drivers don't pay any attention to them.  Over time, air leaks out of those spares, leaving them flat when you most need them.  When you have your vehicle in for service or routine maintenance, ask your service advisor for his or her advice on making sure the spare is inflated properly and cleaned, usually at least twice a year.

You may not know it, but your vehicle may not have any spare at all.  Instead, it may have an inflator kit that you are supposed to use to inflate and seal a flat tire.  That sealant has a limited life span and should be replaced every few years.  Check with your service advisor to make sure the kit is up to date and will do the job when called upon.

Manufacturers know a flat tire's always a possibility.  No matter what contingency solution they've included with your vehicle, keep it in shape and in good working order.  When you need it, you'll be very glad you did.

Bauer Auto Service
14455 State Hwy 23
Cold Spring, MN 56320
320-685-8846



A Honking Big Jam (Stuck Horn)

Posted December 13, 2020 2:50 AM

At one time or another, most drivers honk their horn at someone who might be texting at a stoplight or not paying attention when they're driving.  But what happens when you tap on your horn and all of a sudden it won't quit? Everyone's looking at you like you're an angry jerk and all you want to do is turn it off!

It helps to know the basics of what's happening when you honk your horn.  There's a switch in the steering wheel, of course, and when you press on it, it sends power to a relay which then energizes the horn.  Bingo.  Sound.  When the horn sticks on, one of these parts or the wiring has developed a problem. 

With the ear-splitting noise inside your cabin, it may be hard to keep your cool, but do your best to stay calm.  Try pushing the horn several times; it may un-stick the switch if you're lucky.  If not, there are a couple of things you can try.

First, if you can, pull your vehicle off the road and into a spot where you're not disrupting traffic.  If you feel comfortable rummaging around in your vehicle's fuse box, you might be able to pull the fuse that manages the circuit for your horn system.  A hint: the fuse boxes sometimes have a label inside showing which fuse goes to which part of the vehicle. Find the fuse that goes to the horn and pull it out (sometimes there's a fuse-pulling tool inside the fuse box).

But many people don't feel like tackling that.  Yes, you can drive over to a service facility with the horn blaring (not the best idea).  Or call your service facility and see if they might be able to send someone over to where you are so they can shut off the horn.

At the shop, a technician can check wiring, switches, relays and other components to find out what's wrong.  This is something that should be left to a professional for a couple of reasons.  First, repairs around the steering wheel can involve airbags.  Second, some horn components may be part of a vehicle's alarm system. 

The bad news is that your horn may not give you any warning before it starts blaring uncontrollably.  But the good news is that a horn doesn't malfunction all that often, and now you have a plan if it does.    

Bauer Auto Service
14455 State Hwy 23
Cold Spring, MN 56320
320-685-8846



Straight Ahead (Wheel Alignment)

Posted December 6, 2020 12:17 PM

If every road was straight and smooth, we wouldn't have to worry much about wheel alignment. But they're not, so we do.  Hitting potholes or driving on rough pavement can knock your vehicle out of alignment and you'll notice it in one of several ways.

Your steering wheel may not be centered when you're driving straight ahead, or your vehicle may pull to one side.  You may find your tires wearing on one side or they may squeal.  All are signs that could point to you needing an alignment.

Your wheels should be perpendicular to the road and parallel with each other.  If not, your tires will wear out faster and your vehicle won't go straight on a level straightaway.

In alignment, there are several factors that must be checked.  One is camber.  Your wheels should be straight up and down if you look at them from the front. If not, you'll wear your tires unevenly on one side.

Another factor is caster, the angle of the steering pivot.  Most vehicles have what's called positive caster, when the top of the steering pivot leans toward the rear.  Proper caster balances steering effort, stability on the highway and cornering.

You may have heard the term "toe" in reference to your wheels.  If you looked at your front wheels from straight above, for example, imagine your wheels were your feet.  If you were to turn your toes in toward each other, that would be toeing in.  The toe of your vehicle should be set to manufacturer's specifications so your vehicle handles well and doesn't prematurely wear out tires.

It's a good idea to have your alignment checked periodically since it can get knocked out by one hard knock or a lot of little knocks.  It's not just about tire wear, it's about ride comfort and safe handling. You may say a vehicle aligned just feels divine.


Bauer Auto Service
14455 State Hwy 23
Cold Spring, MN 56320
320-685-8846



Search



Archive

December 2009 (4)
January 2010 (3)
February 2010 (4)
March 2010 (4)
April 2010 (5)
May 2010 (4)
June 2010 (2)
July 2010 (4)
August 2010 (4)
September 2010 (2)
October 2010 (4)
November 2010 (4)
December 2010 (4)
January 2011 (4)
February 2011 (4)
March 2011 (53)
April 2011 (4)
May 2011 (5)
June 2011 (1)
August 2011 (3)
September 2011 (2)
October 2011 (2)
December 2011 (4)
February 2012 (1)
March 2012 (5)
April 2012 (4)
May 2012 (1)
June 2012 (3)
July 2012 (1)
August 2012 (1)
November 2012 (1)
December 2012 (2)
March 2013 (1)
April 2013 (3)
May 2013 (2)
October 2013 (5)
November 2013 (2)
January 2014 (1)
February 2014 (5)
March 2014 (1)
July 2014 (3)
August 2014 (8)
September 2014 (4)
October 2014 (5)
November 2014 (4)
December 2014 (4)
January 2015 (5)
February 2015 (4)
March 2015 (4)
April 2015 (4)
May 2015 (3)
June 2015 (6)
July 2015 (1)
September 2015 (2)
October 2015 (4)
November 2015 (4)
December 2015 (3)
February 2016 (2)
March 2016 (4)
April 2016 (4)
May 2016 (5)
June 2016 (4)
July 2016 (4)
August 2016 (5)
September 2016 (4)
October 2016 (5)
November 2016 (4)
December 2016 (4)
January 2017 (5)
February 2017 (4)
March 2017 (4)
April 2017 (2)
May 2017 (4)
June 2017 (5)
July 2017 (5)
August 2017 (3)
September 2017 (3)
October 2017 (5)
November 2017 (4)
December 2017 (3)
January 2018 (5)
February 2018 (3)
March 2018 (4)
April 2018 (4)
May 2018 (5)
June 2018 (4)
July 2018 (5)
August 2018 (4)
September 2018 (5)
October 2018 (4)
November 2018 (4)
December 2018 (5)
January 2019 (5)
February 2019 (4)
March 2019 (5)
April 2019 (2)
May 2019 (2)
June 2019 (5)
July 2019 (2)
August 2019 (2)
September 2019 (3)
October 2019 (5)
November 2019 (4)
December 2019 (5)
January 2020 (5)
February 2020 (4)
March 2020 (5)
May 2020 (2)
June 2020 (1)
July 2020 (1)
August 2020 (5)
September 2020 (4)
October 2020 (4)
November 2020 (5)
December 2020 (4)
January 2021 (6)
February 2021 (4)
March 2021 (4)
April 2021 (4)
May 2021 (5)
June 2021 (4)
July 2021 (4)
August 2021 (5)
September 2021 (4)
October 2021 (5)
November 2021 (4)
December 2021 (4)
January 2022 (6)
February 2022 (4)
March 2022 (4)
April 2022 (4)
May 2022 (5)
June 2022 (4)
July 2022 (5)
August 2022 (3)
September 2022 (4)
October 2022 (5)
November 2022 (4)
December 2022 (4)
January 2023 (5)
February 2023 (4)
March 2023 (4)
April 2023 (5)
May 2023 (4)
June 2023 (4)
July 2023 (5)
August 2023 (4)
September 2023 (1)
October 2023 (1)
January 2024 (1)
February 2024 (4)
April 2024 (1)
May 2024 (1)

Categories

Maintenance (56)Service Standards (12)Service Intervals (9)Parts (8)Fuel System (48)Transmission (11)Tires and Wheels (40)Steering (14)Automotive News (8)Monitoring System (3)Dashboard (3)Battery (20)Brakes (23)Drive Train (9)Cabin Air Filter (9)Fluids (17)Timing Belt (6)Windshield Wipers (9)Inspection (12)Headlamps (7)Shocks & Struts (9)Alignment (18)Winter Prep (8)Tire Pressure Monitoring System (1)Shocks and Struts (2)Engine Air Filter (3)Serpentine Belt (7)Warranty (2)Check Engine Light (7)Air Conditioning (17)Cooling System (21)Exhaust (13)Differential Service (4)Trip Inspection (4)Older Vehicles (5)Safety (6)Diagnostics (5)Fuel Economy (10)Diesel Maintenance (2)Keys to a long lasting vehicle (4)Suspension (3)Auto Safety (6)What Customers Should Know (81)Emergency Items (1)Alternator (6)Fuel Saving Tip: Slow Down (2)Tire Rotation and Balancing (3)Oil Change (7)Wheel Bearings (1)Customer Detective Work (1)Safe Driving (1)TPMS (3)Tires (10)Winter Tires (1)Water Pump (1)Spark Plugs (2)Brake Service (4)Transfer Case Service (1)PCV Valve (2)Fuel Pump (1)

Interested in working with our team?

We are currently on the lookout for the following:

  • ASE Certified Technicians
  • Entry Level Technicians
  • Service Writer
  • Technicians
  • Learn More