AUTONET TV

Maintaining Your Older Car in Cold Spring, MN

The government mandates a lot of equipment on cars in Cold Spring, MN: emission devices and control computers, safety equipment like airbags and crash worthiness requirements. All of this is great for the Cold Spring motoring public, but it does add quite a bit to the price of a new vehicle.

Because new vehicles are more expensive, people in the Cold Spring area are driving their old vehicles longer. The average vehicle is now over nine years old. Two thirds of vehicles on the road in MN have more than 75,000 miles (120,000 km) on them. As cars age, their performance drops, they have difficulty idling for long periods and are more sensitive to weather extremes. Fortunately today's cars are up to the challenge – but they need a little help to keep on goin'.

Give Bauer Auto Service a call at 320-685-8846 to schedule your next maintenance.

Some owner's manuals don't specify service requirements at higher mileage. That doesn't mean it doesn't have to be done. In fact, it's more important than ever to stay on top of routine maintenance for cars with more than 75,000 miles (120,000km).

First, just extend regular service intervals out: for instance a service that's recommended every 15,000 miles (24,000 km) should be performed at 15,000, 30,000, 45,000 and 60,000 miles (24,000, 48,000, 72,000 and 96,000 km) and so on. Because of the additional stress older engines experience, the severe service maintenance schedule is more appropriate than the regular schedule; ask your service advisor. Watch for leaks; seals and gaskets dry out over time and don't hold the fluids as well as they used to.

It's also time to make sure you have a good technician, like those here at Bauer Auto Service. There are some services and replacements that are scheduled after you put on some clicks, like timing belts, valve train adjustments, suspension, anti-lock brake service, air bags, etc. And unexpected repairs down the road are just par for the course. Check for unusual sounds, smells or the way your car feels. These could be hints that trouble's brewing. Better to catch it early before it turns into a costly repair.

And a regular wash and wax will help maintain your car's appearance. One of the things you can do to really help your high mileage vehicle is to begin using high mileage formulation fluids. There are special engine oils, coolants, and transmission and power steering fluids that are formulated for cars that have a few clicks on the old odometer.

High mileage oil is designed to condition seals and gaskets, reduce wear and avoid premature burn off. Older engines are dirtier inside – and dirty engines contaminate their oil faster. High mileage oil has special additives that clean the engine, removing sludge deposits over time. The result is less stress on the engine, better fuel economy and excellent wear protection.

Studies have even shown that using high mileage fluids early will actually prevent some of the problems of high mileage vehicles. So once you hit around 50,000 miles (80,000 km), consider stepping up to high mileage formulations. High mileage fluids cost a bit more than standard fluids because of the additional additives, but they can be worth their weight in gold in terms of preventing repair costs down the road. It does cost more to properly maintain a higher mileage vehicle – but it's way cheaper than a new car payment!

Bauer Auto Service
14455 State Hwy 23
Cold Spring, MN 56320
320-685-8846

Questions to Ask Your Cold Spring Service Advisor

We find that a lot of Cold Spring drivers are a little tentative when they talk with their automotive advisors. They want to ask questions but don't want to be embarrassed or seem pushy. Vehicles are very complicated and there's more to know about them than most of us have the time to learn. Maybe it's because vehicles have become so much more reliable that the average person just doesn't need to know as much to keep their vehicle on the road.

You know, your local hospital has a Patient's Bill of Rights that they post throughout the hospital. We think our Cold Spring automotive service customers also have a right to ask any question they need to understand what is wrong with their car and what it will take to fix it. They need to feel free to ask the cost and benefits of recommended services. And they certainly have a right to understand the financial end of the transaction.

It's all about the communication. It's a little harder when you're trying to find the right service center in Cold Spring. But once you've developed a relationship, the communication should come easier.

What are some of the barriers to communication? Well, let's go back to the medical example. When your doctor's explaining something to you, it's something that she understands very well and is very familiar with. So she may use jargon you don't understand or that you don't have the education and training that's foundational to understanding what she's trying to explain.

So you fall behind and get frustrated.

It can be the same with your Cold Spring automotive service advisors. Most of them are very busy trying to service and fix cars to get their customers back on the road. So, just ask when you feel you need more information.

Financial related issues seem to be most frustrating to customers. If you're not sure, ask what the payment policies are. For example, there's a big difference between giving your car a quick once over and doing a thorough inspection. Diagnosing a problem may take quite a while. Make sure you know what's done as a courtesy and what has a fee. Remember, you still have to pay for the office visit even if the doctor says you only have a cold.

Communication is a two way street. If you have some real budget concerns, ask your Cold Spring service advisor what he can do. He can give you priorities and options. He can tell you what needs to be taken care of right away for safety or financial reasons. Then you can work out a plan for when to get the rest done. He can also help you with options on the parts. The preference is to always use a high-quality part with a reputation for reliability. But if money is tight, he might be able to find a rebuilt or a used part. He should tell you the difference in the guarantee for the part so you can make a good decision.

Ask about warranties for parts and labor. Be sure to get all the paperwork you need to make a possible claim in the future. Your service center and its technicians stand behind their work and want you to understand precisely what that means.

Be sure to ask for and keep a detailed explanation of all the work that's done on your vehicle. These records will help you keep track of service, warranties and document the good care your vehicle has received when the time comes to sell it.

Give us a call.

Bauer Auto Service
14455 State Hwy 23
Cold Spring, MN 56320
320-685-8846

On Board Diagnostics for Your vehicle

Today we're going to talk about on-board diagnostics and the questions we hear from folks around Cold Spring, MN, who need answers about diagnostic services. They want to know what diagnostics are, what's involved and what the benefits are. They really want to understand the value of diagnostic scans by a trained technician in Cold Spring.

These are valid concerns. If you don't understand something it's really hard to know its value. Let's start with some history.

Since 1996, all cars and light trucks in Cold Spring, MN, have been required to use a standardized diagnostic system to help repair technicians determine what's wrong with your vehicle. The diagnostic system works with the vehicle's Engine Control Module – the computer that controls many engine functions.

The computer monitors dozens of components and processes. Depending on what the sensors read, the computer will make adjustments to compensate for conditions and minor problems. When there is a condition that it can't adjust for, the computer will turn on the Check Engine light.

It is also called the 'service engine soon' light on some vehicles. The warning light signals you to get into your local service center so that the trouble code can be read and the problem can be fixed. Your service center will have a scan tool and powerful software that will help the technician diagnose the problem.

If you've searched for Check Engine light on the internet, you may have seen that you can buy an inexpensive scanner or go to an auto parts store to have the trouble code read to tell you exactly what's wrong.

That's a common myth. The code itself doesn't tell you what's broken. It starts you looking in the right place. It tells you what engine parameter is out of range – but it won't tell you what's wrong or how to fix it.

Let's say you think your daughter has a fever. You take her temperature and it reads 102 degrees F/38.9 degrees C. You've confirmed a fever, but you don't know what's causing it. Is it a 24 hour flu, an infection, appendicitis or leukemia? A fever is a symptom of all of these medical problems, but it takes a skilled physician's examination and additional diagnostic tests to find out what is actually causing the fever.

An example of a trouble code could be: P0133, which reads 'Bank 1 sensor 1 circuit slow response.' This means that the front oxygen sensor has a slow response time to changes in the air-fuel mix. If that's all you knew about cars, you would think your oxygen sensor was broken and would replace it. Now, it could be the oxygen sensor – but it could also be a bad or contaminated airflow sensor, exhaust leak, electrical problem, an intake manifold leak or any of a number of other things.

You can imagine a lot of oxygen sensors have been replaced because of that code. So the on-board diagnostics point the way to where the trouble lies, but it takes some skill and high-tech equipment to actually pinpoint the problem. The cheap scan tools that a consumer can buy do not have the ability to retrieve some of the operating history that's stored in the engine control computer. That history's very helpful in diagnosing the problem. Service centers like Bauer Auto Service invest a lot of money in high-end diagnostic tools to help solve the mystery and get you back on the road as soon as possible without replacing a lot of parts that don't need replacing.

So, on-board diagnostics provide a powerful starting place for a highly-trained, well-equipped technician to get to the bottom of your problem. When your Check Engine light comes on, get it checked at Bauer Auto Service. If the light burns steadily – don't panic. Get in to Bauer Auto Service soon to have the engine scanned. A flashing Check Engine light means that there is a severe engine problem. Get in as soon as you can – waiting too long can lead to very expensive damage.

And try to not drive at high speed or tow or haul heavy loads with a flashing Check Engine light.

Make an appointment with Bauer Auto Service to have your on board diagnostics analyzed.

Bauer Auto Service
14455 State Hwy 23
Cold Spring, MN 56320
320-685-8846

Fuel Injection Basics for Cold Spring

All modern Cold Spring vehicles come with fuel injection systems, so it's a topic Cold Spring drivers need to know something about. The mighty fuel injector is a valve that delivers the gas or diesel fuel to the right place, in the right amount at the right time—to be mixed with air and burned in the engine.

So how many fuel injectors does your vehicle have? There's one for each cylinder. So four, six or eight for most folks in Cold Spring, MN. Some vehicles have 10 or 12 cylinders. The engine control computer makes adjustments to the fuel injector as it monitors the engine and other sensors. Fuel injectors are a pretty high-tech.

Bauer Auto Service can help Cold Spring drivers with a fuel injector cleaning service. What's the benefit? In order to work right, the fuel injectors have to deliver the fuel at a precise pressure at a very precise time. It's important that the fuel is sprayed in a particular pattern as determined by the engine design.

Over time, varnish can start to build up in the fuel injectors, effecting the pressure, pattern and timing of the fuel charge. The result is that the fuel doesn't get burned as efficiently as it could. That robs performance and hurts fuel economy.

What about dirty fuel? How does that affect the fuel injectors? The fuel injectors are the last stop in the fuel system. It starts at the fuel tank. Frankly, the best way to keep your fuel injectors working well is to use high quality fuel. It's tempting to shop for bargains in Cold Spring with fuel prices as high as they are, but major brands in the Cold Spring, MN, area have better detergents and additives and deliver consistent quality.

What about a good fuel filter? The fuel filter is component of the fuel system. Its job is to filter out the dirt and rust that collect in the fuel tank. If it's clogged up, the dirt will bypass the filter and head upstream to the fuel injectors.

It's important to replace the fuel filter when your manufacturer recommends it. That's part of a comprehensive fuel system cleaning.

There are different kinds of fuel injection systems. Port fuel injection systems, the kind most gasoline engines have, operate at 60 pounds per square inch. The injectors for the new gas direct injection engines Cold Spring drivers are starting to see require 10 to 30 times as much pressure. And some diesel engines for passenger vehicles have injectors that operate at 30,000 pounds or more per square inch. There's no room for dirt and gum in a precision part like that.

There are a lot of good products available in Cold Spring, MN, that can clean fuel injectors. They're best used to prevent fouling in the fuel injectors. Many can't clean a seriously gummed up injector – that requires a professional deep cleaning, like those we offer at Bauer Auto Service in Cold Spring. But putting the cleaner in the fuel tank after you've had Bauer Auto Service take a look at your fuel system will help keep it clean. Be sure to read the label for directions.

Give us a call if you think your vehicle may be ready for a fuel injector cleaning.

Bauer Auto Service
14455 State Hwy 23
Cold Spring, MN 56320
320-685-8846