AUTONET TV

Professional Fuel System Cleaning

Getting adequate fuel to your engine is very important for performance, fuel economy and safety. In order to accomplish this, your fuel system needs to be clean.

Today's production cars have fuel injectors, rather than a carburetor. The injectors need to be cleaned from time to time in order to deliver the fuel with the correct pressure, spray pattern and volume.

Cold Spring drivers can buy fuel system cleaners that you pour into your gas tank to help maintain an already clean fuel system; however, they can't do a major cleaning. For that, you need to see Bauer Auto Service in Cold Spring. We have the tools and chemicals to do the job right. Our friendly and knowledgeable team at Bauer Auto Service can remove particles, gum and varnish from your fuel system and get those injectors running cleanly and efficiently.

You'll find Bauer Auto Service at 14455 State Hwy 23 in Cold Spring, MN 56320. Or just give us a call at 320-685-8846 to schedule an appointment.

You'll enjoy more power, better fuel economy and reduced exhaust emissions. The cleaners also help prevent rust and corrosion in your fuel system and lubricate engine parts.

And, as with all maintenance, it can help prevent repairs that can happen because you didn't take preventative steps. Our advisors at Bauer Auto Service can tell you when your car is scheduled for a fuel system cleaning.

On Board Diagnostics for Your Engine

Starting in 1996, Bauer Auto Service service technicians have been able to use a standardized diagnostic system to help determine what is wrong with a vehicle. This diagnostic system works in tandem with the Engine Control Modules for each vehicle's engine. The Engine Control Module is a computer that monitors and controls many engine functions.

Sensors throughout a vehicle send readings to the Engine Control Module. These readings help the computer make adjustments in various vehicle systems to allow for constantly changing driving conditions and even to compensate for minor problems. However, if the computer encounters a situation it can't adjust for, it turns on the Check Engine light. (The Check Engine light is called the “service engine soon” light on some vehicles.)

If the Check Engine light is burning steadily, it indicates a problem that needs to be taken care of soon. If it is flashing, however, the vehicle needs immediate attention at Bauer Auto Service. When the Check Engine light is flashing, the vehicle should not be driven at high speeds, haul heavy loads or tow a trailer. Cold Spring drivers need to understand that doing so can cause major damage.

When a vehicle is brought to Bauer Auto Service in Cold Spring because the Check Engine light is on, a technician will scan the Engine Control Module to learn why it turned the light on. The answer comes as a “trouble code.” The technician has access to software that allows him to enter the code and find out what it means. The software will also let your Bauer Auto Service technician know what might be causing the problem and how to diagnose it.

Notice that the trouble code does not tell your technician at Bauer Auto Service exactly what is wrong with the vehicle. It can only let him know where to start looking to find the problem.

Scanning a trouble code and determining what it means is fairly simple for the pros at Bauer Auto Service. But the ensuing process of actually diagnosing a vehicle's trouble can take a skilled technician some time. Sometimes this can add up to a significant repair bill. Some vehicle owners mistakenly believe  that the “trouble code” is all they need and think they can then fix their vehicles themselves. Some have tried to save money by purchasing an inexpensive scanner, or they take their vehicles to an auto parts store that offers the scan for little or no cost.

These options are often not the money-savers they seem for Cold Spring vehicle owners. They can end up costing the vehicle owner extra in unnecessary repairs and engine damage.

For example, the trouble code P0133 reads “Bank 1 sensor 1 circuit slow response.” Translated, that means the front oxygen sensor shows a slow response time in changing the mix of air to fuel. The seemingly obvious conclusion is that the sensor needs to be replaced. The vehicle owner purchases a sensor, installs it and happily goes on his way.

However, read the trouble again: a slow response time in changing the mix of air to fuel. Nowhere does this indicate that the sensor is bad. There are a lot of parts involved in changing the air-fuel mix, any of which could be causing a slow reaction time. Those include a bad or contaminated airflow sensor, an exhaust leak, a problem in the electrical system or a leak in the intake manifold. The sensor is merely relaying that the response time is slow; it doesn't indicate where the trouble is.

So the vehicle ends up with an oxygen sensor it did not need, and the delay in repairing the actual problem may have led to further damage to the engine. Both are added costs for the vehicle owner.

Cheap scanners also don't have the ability to read the history stored in an engine's computer. This operating history contains clues that can help in diagnosing engine trouble since it can indicate a developing problem. Bauer Auto Service invests a lot of money in high-end diagnostic equipment so that we have access not just to service codes but also to the operating history of the engine.

On-board diagnostics, then, are a tool to help diagnose what is wrong with a vehicle. They cannot specify what part needs to be fixed or replaced, and they cannot replace a well-trained and well-equipped service technician.

Unless you are a trained mechanic, it's good auto advice to use Bauer Auto Service for your car care. In the long run, it can save you time, unnecessary expense and frustration. Bauer Auto Service can also help you keep up with your scheduled preventive maintenance, which can also save you on repair bills by alerting you to potential problems before they get expensive.

Bauer Auto Service
14455 State Hwy 23
Cold Spring, MN 56320
320-685-8846

Why Wheel Balancing and Tire Rotation Save You Money on Tires

Cold Spring drivers want their tires to last as long as possible. Two ways to extend tire life are wheel balancing and tire rotation.

When wheels are out of balance, they wobble and vibrate. That makes the tires wear in a cupping pattern. If a front wheel is out of balance you'll feel it in the steering wheel. If it's a rear wheel you'll feel it through your seat. To fix this, your technician at Bauer Auto Service puts weights on your wheels to balance them out.

That brings us to tire rotation. The front tires on a vehicle wear out faster than the rear tires. As they push through turns, the shoulders of the front tires wear down. So rotating front and rear tires allows them to all wear at about the same rate over the life of the tire.

Proper tire inflation will also help Cold Spring folks' tires last longer. Underinflated tires wear more on the shoulder and may even overheat. This could cause tire damage or a blow out. Overinflated tires wear too fast in the middle.

Four-wheel-drive trucks and SUV's tend to wear their tires more unevenly so rotation is even more important with them. Give Bauer Auto Service a call to get our recommendation for your vehicle.

See your owner's manual or ask your service advisor at Bauer Auto Service for your recommended tire rotation schedule. It's usually every 5,000 to 8,000 miles, or 8,000 to 13,000 km.

Tires are among the most important safety components on your vehicle. Take care of them and they'll take care of you.

Bauer Auto Service
14455 State Hwy 23
Cold Spring, MN 56320
320-685-8846

New School: Automotive Bauer Auto Service Technician Training

Cold Spring consumers are demanding. We want a safe, reliable vehicle that handles well and is comfortable to ride in. Oh, and we want good fuel economy, too. We also want vehicle repairs that are cheap, fast and easy. Unfortunately, one usually comes at the cost of the other.

Today's vehicles have made significant improvements in reliability and performance over the last few decades. They also deliver more power to Cold Spring drivers more efficiently than ever before. For example, some of today's 4-cylinder engines are equal to yesterday's V-8's. Our vehicles also offer an amazing range of features that make them more comfortable and convenient than ever before.

But all of that improvement has come at a price for Cold Spring vehicle owners. Our vehicles are more complicated and difficult to repair than ever before. They have numerous mechanical and electrical systems. Fuel systems are so complex they have to be run by a computer. Our vehicles are covered with sensors and high-tech electronic equipment. Our dashboards rival the control panel of the first manned space flight.

With all that complicated equipment, it's no wonder we call mechanics service technicians these days. You can't learn to repair vehicles in the backyard with your dad anymore. Today's Bauer Auto Service technicians have to go to school. School may come in the form of classroom instruction, online courses or both. Technicians are also trained on-site at the Cold Spring service centers where they work (including Bauer Auto Service) to keep them abreast of constant improvements in vehicle engineering, diagnostic equipment and repair techniques.

Today's technicians need to be certified to work on our vehicles. They can earn a variety of certifications in MN, but the highest of these is Master Technician. It's like a graduate degree in auto repair.

Vehicle repair at Bauer Auto Service in Cold Spring requires more than just training and certification, though. It also takes information and creative thought. Cold Spring area auto service centers subscribe to data services, technical libraries and online repair communities in order to get the information they need to: work on various makes and models of vehicles, get recommended maintenance schedules, learn about non-standard features and locate hard-to-find parts in an unusual engine. They also use this information to help diagnose rare or difficult vehicle problems. Many auto repair problems also require a bit of creative thinking for the team at Bauer Auto Service to solve. Cold Spring service technicians at Bauer Auto Service act much like doctors in these situations. They're given a set of symptoms, and they have to come up with a diagnosis and treatment that will fix the problem. This process becomes as much of an art as it is a science.

A proper diagnosis, even by a highly qualified technician, can take time. And a technician's time is going to cost us. It's just the price of progress.

Of course, the best vehicle care for Cold Spring vehicle owners is planned preventive auto maintenance. This is also the least costly way to keep your vehicle in good repair. Regular inspections and replacement of worn parts will prevent most repairs from ever being needed in the first place.

And with the amazing complexity of today's automobiles, isn't it good to know there's someone out there with the knowledge, training and skill to give us good auto advice? Whether we need preventive maintenance or repairs, the team of automotive professionals at Bauer Auto Service can help us keep our vehicles on the road. We just can't do it on our own anymore.

Bauer Auto Service
14455 State Hwy 23
Cold Spring, MN 56320
320-685-8846

Synthetic Oil for Cold Spring Autos

If you are a driver in Cold Spring and you aren't currently using synthetic motor oil in your vehicle, maybe now's the time to consider it. Need more information? Well, synthetic motor oil is a substitute for petroleum based oil.

Synthetic oil doesn't gel or gum-up like petroleum based oil and it doesn't vaporize as easily. It protects better in severe driving conditions like stop and go driving around Cold Spring, as well as in very hot or very cold conditions. More and more new vehicles are being delivered with full synthetic motor oil, with the recommendation to use synthetic for the life of the vehicle.

Why is this? Synthetic motor oil maximizes engine power and fuel economy. To see why, we'd need a microscope, so we'll have to settle for using our imaginations.

The molecules of conventional motor oil are long hydrocarbon chains. Synthetic motor oil, on the other hand, has uniform, round molecules. Which is more slippery, a pile of pencils or a pile of marbles?

Synthetic motor oil lubricates better because there's less friction. That means better wear protection, cooler operating temperatures, more power and better fuel economy. And synthetic oil doesn't sludge up like conventional oil, so it prevents those small oil passages from clogging up.

Some manufacturers are extending oil change intervals. The added protection of synthetic oil covers you for these longer intervals. Talk with your service advisor about how you drive and see if he thinks you can benefit from synthetic oil. Also ask about the appropriate oil change interval for synthetic, because it may very well be longer than for conventional oil.

Most of us here in Cold Spring have a busy life and might occasionally miss an oil change; go ahead, admit it. Since we're not perfect, doesn't it make sense to use a motor oil that's got your back?

Now synthetic oil costs more. But it lasts longer, protects better and increases fuel economy. You'll likely save money in the long run. If you're serious about making your car last longer, start using synthetic motor oil right away.

Give us a call to schedule an oil change, or visit us at our Bauer Auto Service website.

Bauer Auto Service
14455 State Hwy 23
Cold Spring, MN 56320
320-685-8846