AUTONET TV

Straight to the Point (Alignment Signs of Problems)

It’s just common sense that your vehicle will drive better if all the wheels are lined up with each other and the road the way the engineers intended.  When they’re not, that is called being out of alignment.   Here are some signs that your alignment has problems.

• Your steering wheel isn’t straight when your vehicle goes straight down a straight road. This one’s pretty easy to notice.  If your vehicle’s logo on the wheel is tilted, that’s probably not the way designers wanted it to be. Bring it in and have us check it out.
• Your steering wheel is vibrating on a smooth road or when you are accelerating.  While this could be caused by several different things, one possibility is misalignment.  If your steering wheel is shaking, it should be examined by a trained technician.
• Your vehicle is pulling to one side without you wanting it to.  Sometimes the configuration of the road will cause it to pull slightly left or right.  But if you find yourself constantly correcting course to keep your vehicle headed straight down the road, that’s worth having us look at your alignment.
• You’re going through tires like there’s no tomorrow. The tread on your tires should be wearing nice and evenly from the outside to the inside of the tire.  If the wear isn’t even, it could be your vehicle needs an alignment.

We have equipment designed to quickly and accurately measure your vehicle’s alignment.  We can make precise adjustments to make sure you are headed straight where you want to go.  Have your alignment checked regularly. It can help prevent more serious problems in the future and make your vehicle drive as beautifully as you remember it used to.

Bauer Auto Service
14455 State Hwy 23
Cold Spring, MN 56320
320-685-8846

I'm Cool With That (AC Exchange)

On a hot day, you want your vehicle's air conditioning to work.  When the air blowing out of your vents isn't cold, it's easy to think, "I'll just take it by the shop and have them top off my refrigerant." But while some people think air conditioning is that simple, it's actually not.

If your refrigerant is low, something has to have happened for it to be depleted.  Perhaps there's a leak in the system.  Or some hoses or clamps have failed.  If the system isn't evaluated by someone who knows air conditioning, it's possible that adding refrigerant will just be a band-aid solution.

It's also possible that contaminants have gotten into the refrigerant, such as carbon dioxide, nitrogen, argon, or air.  Some of those gases do not condense like refrigerant does which can increase the pressure inside the system and strain the lines and other components. At that point, the best course of action may be to have the old refrigerant (with its contaminants) bled from the system and have your AC recharged with new refrigerant.

Bring it to us, and we can inspect and test the system and all its components.  That will include a pressure test for leaks.  Most vehicle manufacturers don't have a service schedule for air conditioning systems, so one way to know when you should have it looked at is when it's not behaving the way it used to.  For example, it may not get cold as fast as it did before or even at all.

So, when hot air is exiting your vents when you want it to be cold, schedule an appointment and have a trained technician take care of it.  Are you cool with that?

Bauer Auto Service
14455 State Hwy 23
Cold Spring, MN 56320
320-685-8846

To Fix or Not To Fix (Tire Repair)

You know that sinking feeling when you realize one of your tires has a problem.  It may be making an odd noise or behaving oddly when you're driving.  You may hit a pothole or curb and one suddenly goes flat.  Or you may head back to your vehicle and discover it has one tire deflated without a clue of what must have happened to it.

With a lot of different tires hitting the streets these days, the issue of whether to have a tire repaired or replaced can be tricky, and we strongly recommend you have a trained technician help you make that decision. 

One of the most common causes of flat tires is picking up a screw or nail in the tread area.  Many of those can be patched and plugged if the puncture isn't more than ¼ inch/6 mm in diameter. Most tires can handle two of this type of repair, but any more and you should buy a new tire. 

If there's a puncture or bulge in the sidewall or shoulder, the rule of thumb is it's not repairable.  The sidewall doesn't have the reinforcements that the tread area does.  In fact, any puncture that's more than a ½ inch/12 mm away from the edge of the tread should not be fixed. 

Many newer vehicles have no spare tires (to save weight and fuel) and instead have a type of tire called "run-flat."  Sometimes, the only way you know they're deflated is when the tire pressure monitor alerts the driver.  Driving on them more than 50 miles/80km can render them un-repairable.  They may be fixable if you pulled off to the side of the road before driving on them too long. Our technicians can evaluate whether they can be driven further or should be replaced.

Other vehicles with no spare include a can of tire sealant and a compressor.  If you use it, tire experts say to have the tire professionally repaired as soon as possible.

If you have had a flat tire, try not to drive on it unless it's necessary to get your vehicle away from a dangerous situation.  Our technicians can evaluate any tire you may be having problems with and recommend whether repair or replacement is the best option. Your safety is riding on your tires.  

Bauer Auto Service
14455 State Hwy 23
Cold Spring, MN 56320
320-685-8846

The Light Many Drivers Fear (Check Engine Light)

Ask just about any driver about one thing they fear seeing inside their vehicle and they'll say it's the Check Engine light coming on. You know, that little light on your instrument panel that is in the shape of a vehicle engine, often accompanied by the words Check, Check Engine, Check Engine Service, or Service Engine Soon.

There are so many different reasons that light shows up, from something as simple as a loose gas cap to a more serious problem that requires immediate attention. 

The Check Engine light comes on because a component of your vehicle's onboard diagnostics system is telling you something isn't operating normally. Your vehicle has a lot of sensors built in, all tied together by computers.  When the sensors are showing that things somewhere aren't functioning the way they should be, they alert the vehicle's diagnostic computers and tell you something's amiss.

The simple rule is if the Check Engine light is on steadily, it's something you should have checked soon but it's not urgent.  If it's flashing or has turned red or orange instead of yellow, get your vehicle checked out as soon as possible.  If you don't, you may be facing some costly repairs.

Here are a few problem areas that may trigger your Check Engine Light. 

• Something's wrong with the emissions equipment.  Maybe too much fuel is getting into the catalytic converter, or the exhaust gas recirculation system isn't working right.  Because some of these components are expensive to replace, it's worthwhile to have a technician look at your vehicle sooner rather than later.
• Your ignition system isn't working right.  That means spark plugs, coils, and wires.  If your engine is misfiring, that could translate into an illuminated Check Engine light.
• The transmission isn't behaving the way it should.  The transmission works in tandem with the engine, so if a sensor sees something wrong there, it will tell the vehicle to turn on the Check Engine light.

As you can see, there are many things that can cause the light to come on, and when it does, it really is a good idea to find out why.  When you bring your vehicle in, we have an electronic device that can read a code or multiple codes stored in your vehicle's computers.  That will provide the technician with clues pointing to the cause of the trouble and helps pinpoint where that trouble is. 

Bauer Auto Service
14455 State Hwy 23
Cold Spring, MN 56320
320-685-8846