AUTONET TV

The Daily Grind (Grinding Noise)

If your vehicle makes a grinding sound when you turn the steering wheel, it's speaking to you.  No, really, it is.  So listen to what it's saying and you could avoid a much more costly repair down the road.

A grinding sound coming from the front of your vehicle when you are turning can offer some very informative clues as to what's going on.  One cause could be that there's a problem with the mechanical linkage that enables you to turn the wheels.  Another is that the hydraulic system that makes turning the steering wheel easier may have its own problems. 

Think of it.  Hydraulic power steering has many components that need to work in tandem.  The power steering fluid may be too old and contaminated.  Or its level may be low. That may be caused by a leak somewhere in the system. A technician can check things over to find out exactly what's happening.

Other causes of grinding while turning can be problems with the suspension in the front.  You may have a failing CV (constant velocity) joint.  It could be your brakes are partially engaging while you are turning.  That metal-on-metal sound is never a sign that things are working just the way they're supposed to.

To a technician looking to pinpoint the problem with your vehicle, it's not a daily grind at all.  Experience and training will help her or him zero in on what's causing the noise and get you back on the road. Maybe you can enjoy your sound system more after that distracting background noise has disappeared!

Bauer Auto Service
14455 State Hwy 23
Cold Spring, MN 56320
320-685-8846

Out with the Old (Vehicle Parts that Wear Out)

Some drivers don't pay any attention to their vehicles until something breaks.  Others take them into their service repair facility for maintenance even before a problem develops.  Still, even if you fit into the second group, there are some parts on a vehicle that will simply wear out over time.

Your vehicle has gaskets in several places.  They use a flexible material to seal the gaps between metal parts that fit together. After time, that material shrinks or gets brittle and fails.  Eventually, after time, you will have to get gaskets replaced.

Same goes for belts.  Your engine has belts that help take the mechanical energy of the engine to drive other parts such as the generator and air conditioner.  Heat and age will eventually cause these belts to wear out or break, so you'll need new ones at some point.

You'll also find yourself buying brake pads.  As much as you may try to go easy on them, brake pads work by wearing off a little bit of them each time they help you stop your vehicle.  Do a lot of stop-and-go driving and you'll hasten the process.

No battery lasts forever, and your vehicle's battery is no exception.  It can only charge and discharge electricity so many times.  Count on getting no more than 4 or 5 years out of a battery, fewer if you live in a very hot spot.

Other parts that don't age well? Tires.  They can have plenty of tread left on them, but rubber gets old and loses its flexibility. Tires have their date of manufacturer stamped on them for a reason.

Finally, your muffler is being subject to moisture from inside and out: inside because of moisture-containing exhaust and outside from the elements outdoors. Stainless steel or other alloys will last longer, but after a while, either the moisture or constant pounding from vibrations will take their toll.

That's why it's important to maintain every part on your vehicle. You can't wave a magic wand and make everything last forever, but take care of your vehicle and it'll take care of you.

Bauer Auto Service
14455 State Hwy 23
Cold Spring, MN 56320
320-685-8846

What is a TPS? (Throttle Position Sensor)

You know you have an accelerator pedal; step on it and your vehicle is supposed to go.  But did you know there is a part in your vehicle that keeps track of where the throttle is? It's called the Throttle Position Sensor, or TPS.

The TPS is a sensor that helps your vehicle figure out the right mix of air and fuel is reaching your engine.  It does that by keeping track of the throttle and sending that information to your vehicle's computer.  Other factors play a role in how well your engine is performing, including air temperature, how fast the engine is turning over and air flow. 

When the TPS isn't working right, you may find your vehicle won't accelerate or doesn't have the power you're expecting when you press on the accelerator.  In some cases, it may accelerate on its own.  Sometimes your vehicle won't go over a certain speed.  Your Check Engine light may go on.

Any of these symptoms should be checked out soon.  If your TPS stops working right, your vehicle may not be safe to drive.  Fortunately, most vehicles have a "limp home" mode that will allow you to get off a busy road to a safe spot. 

Your service advisor can let you know which TPS is the correct replacement for your vehicle.  Your shop may have to re-program the new TPS so it works correctly with other software in your vehicle.

It's a fact of life these days that computers control many of a vehicle's functions. The sensors that feed information to those computers help make your vehicle work the way it was engineered to and keep you motoring down the road safely and efficiently.

Bauer Auto Service
14455 State Hwy 23
Cold Spring, MN 56320
320-685-8846

Busted! Air Conditioning (Air Conditioning Maintenance)

Your vehicle's air conditioning is something you count on when the weather heats up.  But there's bound to be a day when you turn it on and one of these things happens:

• Only warm air blows out
• Cold air starts blowing out but then it turns warm on its own
• It's not blowing air at all
• It blows smelly air out

Some people are tempted to try to make the diagnosis—and the repair—on their own.  They think it's just run out of refrigerant and they can pick up a can at a local auto parts store and re-charge it.   If only it was that easy.

A vehicle's air conditioning system is complex and made up of many parts.  A compressor, evaporator, condenser, tubing, hoses, sensors, valves… the list goes on and on.

Each of these components could be the reason for the problem.  It could be a leak that's letting the refrigerant escape, but simply re-charging the system hasn't fixed the problem. You have to find the source of the leak and fix it. Service facilities have a device called a "sniffer" which can sniff out refrigerant chemicals. And they can use black light to locate refrigerant that has an ultraviolet dye in it. 

But often other components wear out; blower motors go bad, resistors blow, tubes clog, compressors fail. And diagnosing that takes training and special equipment you'll find at your service facility.

One other thing to keep in mind.  It's always better to catch any problems in the air conditioning system before it fails. Ask your service advisor about having

the A/C checked as part of the vehicle's maintenance.  That's the cool way to go. 

Bauer Auto Service
14455 State Hwy 23
Cold Spring, MN 56320
320-685-8846