Good Service at Bauer Auto Service Equals Good Fuel Economy in Cold Spring
Posted December 25, 2016 8:18 AMWhether we're trying to save money, save gas or save the environment, most of us Cold Spring drivers have an interest in decreasing fuel consumption. We've all heard about ways to save money on gas in MN, but does it really add up to much? How much can we boost our fuel economy through preventive maintenance and more courteous driving?
The US government has a website that actually answers that question. Let's look at some of the data and find out if any of these fuel-saving ideas are really worth the effort. We've all heard that a tune-up can improve gas mileage. It turns out that it can save us 4% at the pump. At $3.50 a gallon, that's 14¢ per gallon in savings, and at $4.00 a gallon, that's a 16¢ per gallon savings.
Other common repair items can also save you at the pump. For example, if your oxygen sensor is faulty, it's not delivering the information to your engine's computer that allows it to calculate the right fuel-to-air ratio. The result? The fuel doesn't burn efficiently. Replacing that faulty sensor can save you 40% at the pump. That's certainly a reason to improve your car care and have the automotive professionals at Bauer Auto Service inspect things once in a while.
A faulty oxygen sensor will activate the check engine light. So will a lot of other problems that are big fuel wasters. Finding out why your light is on and fixing the problem will also improve your fuel economy. Bring your car into Bauer Auto Service in Cold Spring and we will take care of it for you.
What about tires? Cold Spring drivers have all heard that keeping them inflated will improve our gas mileage. True? Yep. It's a 3% savings for that one. And even small drops in tire pressure can start to add up, so a weekly tire check is in order.
Using the correct weight in motor oil is another way you can save at Cold Spring area gas pumps. It adds up to a 2% savings.
What about that courteous driving? That doesn't cost us anything and doesn't require our Cold Spring service center to implement anything. Is it worth the bother?
Again, the answer is yes. Sudden acceleration, such as charging away from stoplights, sudden stops and quick lane changes all add up in lowered fuel economy. Taking it easy when you drive on MN roads amounts to a 5% savings around town and a whopping 33% savings on the freeway. Is it worth your time to slow down? How much do you get paid?
Speeding is another way we ding ourselves at the gas pump. We've all heard that it's okay to drive five miles over the speed limit, but that actually hurts our wallets. Eventually it could add up to more than a speeding ticket. An extra five miles over the speed limit ends up costing us 7% per gallon. Fifteen miles over? 23% Now there's a reason to slow down.
Another thing Cold Spring vehicle owners can do to improve that costs nothing is to toss the junk out of our trunks. In other words, clean out the car and stop hauling around non-essentials. Don't treat your vehicle like a storage locker. Dumping one hundred pounds of extra weight adds up to a 2% savings at the pump.
So when you tell someone you were going somewhere anyway and they're welcome to come along, that's okay. But if someone tells you they need to come along and it's no harm to you since you were going anyway—well, now you can tell them, “Sorry, dude, but you're an extra fifteen cents a gallon!”
All joking aside, let's all do ourselves a favor and fatten up our wallets by practicing good car care and better driving habits in MN.
Bauer Auto Service
14455 State Hwy 23
Cold Spring, MN 56320
320-685-8846
The Economy of Maintenance for Cold Spring Drivers
Posted December 18, 2016 9:58 AMDo I keep my old vehicle or buy a new one? It's a question most Cold Spring drivers ask themselves at some time or another.
Generally, what it comes down to is the choice between a car payment and the possibility of repair bills. Most of the time, we want to choose the car payment because we don't like the inconvenience and uncertainty of vehicle repairs. But that payment has a detrimental effect on our budget and bank account.
Edmunds.com is a great website to help you with your decision. This site uses repair histories to calculate the average repair bills for specific makes and models of cars. You can plug in the information for your vehicle and get an estimate on what it will probably cost you to continue owning that vehicle.
Now, Edmunds.com isn't a crystal ball. It can't know what will happen to your specific vehicle. But it can guide you in knowing how much money to budget for the repair and maintenance of your vehicle. Ultimately, that can help you in your decision to buy a new vehicle or wait a few years.
For example, a five-year-old Camry V-6 is projected by Edmunds.com to cost about $96 a month, on average, to repair and maintain (at the time of this writing). Remember, maintenance costs are part of vehicle ownership, whether it's a new vehicle or an old one, so the projected cost for repairs on your five-year-old Camry average out to only about $50 a month. That's a whopping lot less than a new car payment.
If your vehicle is older than five years, you should also talk to your friendly and knowledgeable professional at Bauer Auto Service about its future. They are more familiar with the average cost of repairs for vehicles in your area and of specific problems they commonly see in particular vehicles. More importantly, they know you and they know your car. They can give you a heads-up on what repairs you may be facing in the near future.
Remember, the older your vehicle gets, the more important preventive auto maintenance becomes. Over time, vehicles accumulate wear and debris, and we just have to give them a little more attention. Getting to know your vehicle and its peculiarities is also good auto advice for Cold Spring drivers.
If you decide to keep your older vehicle, you may want to talk with your Bauer Auto Service service advisor about fluids specially formulated for older engines. These motor oils, transmission and other fluids are designed to clean older engines and automotive systems and recondition their seals and gaskets.
Good care at Bauer Auto Service in Cold Spring will keep your older vehicle on the road in MN. And that may be just the boost you need in this uncertain economy. It may even save you enough to be able to afford that new vehicle you've been dreaming about.
Bauer Auto Service
14455 State Hwy 23
Cold Spring, MN 56320
320-685-8846
Drive Train - What You Need to Know in Cold Spring
Posted December 12, 2016 7:26 AM
One Cold Spring automotive service issue that doesn't get much attention is driveline service. Drivelines don't get talked about very much around Cold Spring, but they're very important. First let's define what the driveline is:
Taking a small step back, the power plant is comprised of the engine and transmission. The driveline starts there and includes all of the components that transfer power from the transmission to the wheels.
That's not really a lot of components, but they handle the full force of the engine. Without the driveline you're not moving. So Cold Spring residents need to take good care of it. The driveline components differ depending on whether your vehicle has front wheel drive, rear wheel drive, all wheel drive or four wheel drive. For purposes of our discussion, we're going to have to oversimplify a bit.
If you are ready to have your drive train looked at, give us a call at 320-685-8846.
Let's start with front wheel drive. The point where the transmission stops and the driveline begins is a little blurred with front wheel drive because the transaxle houses both the transmission function and the differential function. The half shafts that send power to each front wheel come out of the transaxle. The shaft is connected to the wheel by a constant velocity, or CV, joint. The CV joint is protected from dirt and water by an airtight, flexible rubber boot.
So, Bauer Auto Service driveline service would include properly servicing the transaxle and inspecting the cv boot to see if it's torn or loose. If it is, it needs to be replaced and the CV joint inspected for damage. Repairs may be in order. Besides visual damage to the airtight CV boot, you might hear a clicking noise when turning. Recommended maintenance for the transaxle and CV joints will be spelled out in your owner's manual, or check with your friendly and knowledgeable Bauer Auto Service service advisor.
On to rear wheel drive. The driveline for a rear wheel drive vehicle starts with the driveshaft – that long tube that connects the transmission with the differential on the rear axle. Some vehicles in Cold Spring have a two piece drive shaft. The shafts are connected to the transmission and the differential with big universal joints. Most Cold Spring residents have probably heard the term 'u-joints.' These joints can wear out, just like the CV joints in front wheel drive vehicles. You may hear some clunking or feel a jolt when shifting into drive or reverse – if you do, get your driveline inspected at Bauer Auto Service in Cold Spring.
The differential on the rear axle sends power out to each rear wheel through half shafts in the axle. The differential fluid needs to be drained periodically and replaced with clean fluid. When the seal on the end of the axle is damaged or leaks, the axle will need to be serviced. The routine maintenance item here is differential service. Be sure to check your owner's manual or Cold Spring service advisor for intervals.
Now let's go on to all wheel drive. Remember that the difference between all wheel drive and four wheel drive is that an all wheel drive vehicle is essentially providing power to all of the wheels all of the time. The vehicle may be able to shift more of the power to the front or to the back depending on where you need traction. All wheel drive vehicles are designed to work well on dry pavement. Even some high-end sports cars from makers like Lamborghini and Porsche have all wheel drive.
Some all wheel drive vehicles are designed to work well off-road in Cold Spring, but all hard-core rock crawlers are four wheel drive. These guys thrive in mud, sand, rocks and hills – but they don't work well on dry pavement when they're in four wheel drive. So they have the option to shift to rear wheel drive only on dry pavement.
Most all-wheel drive vehicles are very similar to front wheel drive when it comes to the front end. They also have a center differential that transfers power to the rear differential. Connecting it all is a shaft from the transaxle to the center differential and another from the center differential to the rear differential. So all of the normal front wheel drive service is recommended as well as service to the center and rear differentials.
Four wheel drive can be thought of as a rear wheel drive vehicle that can also send power to the front axle. There's a transfer case in the middle of the vehicle that can be shifted to send power through a drive shaft to a differential on the front axle. So Cold Spring residents need differential service for the front and rear differentials and for the transfer case as well.
The bottom line for Cold Spring residents is that the maintenance schedules are in your owner's manual. Your Cold Spring service advisor can answer any questions you've got. If this is the first time you've heard some of this stuff – it's time to ask someone at Bauer Auto Service if any of it needs to be done now.
Bauer Auto Service
14455 State Hwy 23
Cold Spring, MN 56320
320-685-8846
Everything You Ever Wanted to Know About Wheel Bearings
Posted December 4, 2016 12:43 PM
Why are wheel bearings for Cold Spring vehicles important? It's simple: your wheel bearings keep the wheels on your vehicle. In today's Bauer Auto Service post, we'll discuss more about wheel bearings and how you can make sure they can do their very job while you drive around Cold Spring, MN.
Wheel bearings are pretty simple parts. They're made of high quality steel and are engineered to last 100,000 miles (160,000) or more if properly cared for. The bearings do two jobs: First, they allow the wheel to freely rotate with as little friction as possible. Second, they support the weight of the vehicle. For example, if your car weighs 3,600 pounds (1600 kilogram), each wheel has to support approximately 900 pounds (400 kilograms). That's a lot of heavy lifting over those long distances.
Even though wheel bearings are pretty straightforward, they need to be in near perfect condition to do their job for Cold Spring vehicles. The bearings are packed with heavy grease to lubricate and protect them. A seal keeps the grease in and water and dirt out. It's when the seal starts to leak that problems begin. The grease can become contaminated, causing the wheel bearings to overheat and ultimately fail.
The first sign that your wheel bearings are in trouble is an unusual noise coming from a wheel. It could be a chirping, growling, rumbling or a cyclic sound. The noise could get louder or even disappear at certain speeds. Your technician at Bauer Auto Service can inspect for bearing wear by lifting the vehicle and checking for play in the wheel.
Now some wheel bearing assemblies are factory sealed. That means that they cannot be serviced – they can only be replaced. Those that aren't sealed can be serviced on schedule at Bauer Auto Service. The bearings are removed, cleaned and inspected. If the bearings are still good, they're re-installed – if not, they're replaced. They are then packed in grease and a new seal is installed.
If your vehicle has a factory sealed wheel bearing assembly, the entire assembly needs to be replaced when trouble arises. Unfortunately, the parts are pretty costly – but they usually last about 150,000 miles (240,000 kilometers) as long as the seals hold up.
Now, even a good seal cannot keep out water that's exerting pressure on the seal. So if you've driven through hub-deep water, your bearings should be cleaned and repacked if they're serviceable. If you have factory sealed bearings, you just need to watch for signs of premature failure. If your wheel bearings can be serviced, your manufacturer's owner's manual will recommend an interval, usually around 30,000 miles (50,000 kilometers).
If you have any sort of trailer, don't forget its wheel bearings. They probably need to be serviced even more frequently. This is especially true for boat trailers that are used to launch the boat by backing it into the water. These should be serviced every year, usually at the end of the season so that the bearings don't have the opportunity to rust all winter.
So what happens to Cold Spring vehicles if wheel bearings fail? Well, the wheel can literally fall off the vehicle. I don't need to tell you how that could be. So check with your service advisor at Bauer Auto Service and see if your vehicle's wheel bearings can be serviced and when it's recommended. Listen for warning signs. If you've been fording streams or puddle surfing after rainstorms, be especially vigilant.
Visit the automotive professionals at Bauer Auto Service for a wheel bearing inspection.
Bauer Auto Service
14455 State Hwy 23
Cold Spring, MN 56320
320-685-8846